79 research outputs found
Observation of Spontaneous Brillouin Cooling
While radiation-pressure cooling is well known, the Brillouin scattering of
light from sound is considered an acousto-optical amplification-only process.
It was suggested that cooling could be possible in multi-resonance Brillouin
systems when phonons experience lower damping than light. However, this regime
was not accessible in traditional Brillouin systems since backscattering
enforces high acoustical frequencies associated with high mechanical damping.
Recently, forward Brillouin scattering in microcavities has allowed access to
low-frequency acoustical modes where mechanical dissipation is lower than
optical dissipation, in accordance with the requirements for cooling. Here we
experimentally demonstrate cooling via such a forward Brillouin process in a
microresonator. We show two regimes of operation for the Brillouin process:
acoustical amplification as is traditional, but also for the first time, a
Brillouin cooling regime. Cooling is mediated by an optical pump, and scattered
light, that beat and electrostrictively attenuate the Brownian motion of the
mechanical mode.Comment: Supplementary material include
Searching for Exoplanets Using a Microresonator Astrocomb
Detection of weak radial velocity shifts of host stars induced by orbiting
planets is an important technique for discovering and characterizing planets
beyond our solar system. Optical frequency combs enable calibration of stellar
radial velocity shifts at levels required for detection of Earth analogs. A new
chip-based device, the Kerr soliton microcomb, has properties ideal for
ubiquitous application outside the lab and even in future space-borne
instruments. Moreover, microcomb spectra are ideally suited for astronomical
spectrograph calibration and eliminate filtering steps required by conventional
mode-locked-laser frequency combs. Here, for the calibration of astronomical
spectrographs, we demonstrate an atomic/molecular line-referenced,
near-infrared soliton microcomb. Efforts to search for the known exoplanet HD
187123b were conducted at the Keck-II telescope as a first in-the-field
demonstration of microcombs
Spectral Line-by-Line Pulse Shaping of an On-Chip Microresonator Frequency Comb
We report, for the first time to the best of our knowledge, spectral phase
characterization and line-by-line pulse shaping of an optical frequency comb
generated by nonlinear wave mixing in a microring resonator. Through
programmable pulse shaping the comb is compressed into a train of
near-transform-limited pulses of \approx 300 fs duration (intensity full width
half maximum) at 595 GHz repetition rate. An additional, simple example of
optical arbitrary waveform generation is presented. The ability to characterize
and then stably compress the frequency comb provides new data on the stability
of the spectral phase and suggests that random relative frequency shifts due to
uncorrelated variations of frequency dependent phase are at or below the 100
microHertz level.Comment: 18 pages, 4 figure
An Integrated-Photonics Optical-Frequency Synthesizer
Integrated-photonics microchips now enable a range of advanced
functionalities for high-coherence applications such as data transmission,
highly optimized physical sensors, and harnessing quantum states, but with
cost, efficiency, and portability much beyond tabletop experiments. Through
high-volume semiconductor processing built around advanced materials there
exists an opportunity for integrated devices to impact applications cutting
across disciplines of basic science and technology. Here we show how to
synthesize the absolute frequency of a lightwave signal, using integrated
photonics to implement lasers, system interconnects, and nonlinear frequency
comb generation. The laser frequency output of our synthesizer is programmed by
a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and
traceability to the SI second. This is accomplished with a heterogeneously
integrated III/V-Si tunable laser, which is guided by dual
dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through
out-of-loop measurements of the phase-coherent, microwave-to-optical link, we
verify that the fractional-frequency instability of the integrated photonics
synthesizer matches the reference-clock instability for a 1
second acquisition, and constrain any synthesis error to while
stepping the synthesizer across the telecommunication C band. Any application
of an optical frequency source would be enabled by the precision optical
synthesis presented here. Building on the ubiquitous capability in the
microwave domain, our results demonstrate a first path to synthesis with
integrated photonics, leveraging low-cost, low-power, and compact features that
will be critical for its widespread use.Comment: 10 pages, 6 figure
Bridging ultrahigh-Q devices and photonic circuits
Optical microresonators are essential to a broad range of technologies and scientific disciplines. However, many of their applications rely on discrete devices to attain challenging combinations of ultra-low-loss performance (ultrahigh Q) and resonator design requirements. This prevents access to scalable fabrication methods for photonic integration and lithographic feature control. Indeed, finding a microfabrication bridge that connects ultrahigh-Q device functions with photonic circuits is a priority of the microcavity field. Here, an integrated resonator having a record Q factor over 200 million is presented. Its ultra-low-loss and flexible cavity design brings performance to integrated systems that has been the exclusive domain of discrete silica and crystalline microcavity devices. Two distinctly different devices are demonstrated: soliton sources with electronic repetition rates and high-coherence/low-threshold Brillouin lasers. This multi-device capability and performance from a single integrated cavity platform represents a critical advance for future photonic circuits and systems
Stimulated optomechanical excitation of surface acoustic waves in a microdevice
Stimulated Brillouin interaction between sound and light, known to be the
strongest optical nonlinearity common to all amorphous and crystalline
dielectrics, has been widely studied in fibers and bulk materials but rarely in
optical microresonators. The possibility of experimentally extending this
principle to excite mechanical resonances in photonic microsystems, for sensing
and frequency reference applications, has remained largely unexplored. The
challenge lies in the fact that microresonators inherently have large free
spectral range, while the phase matching considerations for the Brillouin
process require optical modes of nearby frequencies but with different
wavevectors. We rely on high-order transverse optical modes to relax this
limitation. Here we report on the experimental excitation of mechanical
resonances ranging from 49 to 1400 MHz by using forward Brillouin scattering.
These natural mechanical resonances are excited in ~100 um silica microspheres,
and are of a surface-acoustic whispering-gallery type
A self-stabilized coherent phonon source driven by optical forces
[EN] We report a novel injection scheme that allows for phonon lasing in a one-dimensional optomechanical photonic crystal, in a sideband unresolved regime and with cooperativity values as low as 10-2. It extracts energy from a cw infrared laser source and is based on the triggering of a thermooptical/free-carrier-dispersion self-pulsing limit-cycle, which anharmonically modulates the radiation pressure force. The large amplitude of the coherent mechanical motion acts as a feedback that stabilizes and entrains the self-pulsing oscillations to simple fractions of the mechanical frequency. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122 MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon platform, which enables its exploitation in sensing, intra-chip metrology or time-keeping applications.This work was supported by the European Comission project TAILPHOX (ICT-FP7-233883), the ERC Advanced Grant SOULMAN (ERC-FP7-321122) and the Spanish MINECO project TAPHOR (MAT2012-31392). The authors sincerely thank B. Djafari-Rouhani, Y. Pennec and M. Oudich for the design of the OM photonic crystal, A. Trifonova, S. Valenzuela and E. Weig for a critical reading of the manuscript and A. Tredicucci for fruitful discussions. A. M and A. G thank L. Bellieres and N. Sanchez-Losilla for their contributions in the OM photonic crystal etching processes. DNU and JGB gratefully acknowledge the support of a Beatriu de Pinos and a Juan de la Cierva postdoctoral fellowship, respectively.Navarro Urríos, D.; Capuj, NE.; Gomis-Bresco, J.; Alzina, F.; Pitanti, A.; Griol Barres, A.; Martínez Abietar, AJ.... (2015). A self-stabilized coherent phonon source driven by optical forces. Scientific Reports. 5(15733):1-7. https://doi.org/10.1038/srep15733S17515733Feng, X. L., White, C. J., Hajimiri, A. & Roukes, M. L. A self-sustaining ultrahigh-frequency nanoelectromechanical oscillator. Nat. Nanotech. 3, 342 (2008).Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Rev. Mod. Phys. 86, 1391 (2014).Pikovsky, A., Rosenblum, M. & Kurths, J. Synchronization: a universal concept in nonlinear sciences (Cambridge university press, Cambridge 2003).Heinrich, G., Ludwig, M., Qian, J., Kubala, B. & Marquardt, F. Collective dynamics in optomechanical arrays. Phys. Rev. Lett. 107, 043603 (2011).Zhang, M. et al. Synchronization of micromechanical oscillators using light. Phys. Rev. Lett. 109, 233906 (2012).Bagheri, M., Poot, M., Fan, L., Marquardt, F. & Tang, H. X. Photonic cavity synchronization of nanomechanical oscillators. Phys. Rev. Lett. 111, 213902 (2013).Matheny, M. H. et al. Phase synchronization of two anharmonic nanomechanical oscillators. Phys. Rev. Lett. 112, 014101 (2014).Mahboob, I., Nishiguchi, K., Fujiwara, A. & Yamaguchi, H. Phonon Lasing in an Electromechanical Resonator. Phys. Rev. Lett. 110, 127202 (2013).Grudinin, I. S., Lee, H., Painter, O. & Vahala, K. J. Phonon laser action in a tunable two-level system. Phys. Rev. Lett. 104, 083901 (2010).Kippenberg, T. J., Rokhsari, H., Carmon, T., Scherer, A. & Vahala, K. J. Analysis of radiation-pressure induced mechanical oscillation of an optical microcavity. Phys. Rev. Lett. 95, 033901 (2005).Kippenberg, T. J. & Vahala, K. J. Cavity optomechanics: back-action at the mesoscale. Science 321, 1172–1176 (2008).Schliesser, A. & Kippenberg, T. J. in Cavity Optomechanics, Aspelmeyer M., Kippenberg T. J. & Marquardt F. Eds (Springer: Berlin Heidelberg, 2014), chap. 6.Roels, J. et al. Parametric instability of an integrated micromechanical oscillator by means of active optomechanical feedback. Opt. Express 19, 13081–13088 (2011).Villanueva, L. G. et al. A nanoscale parametric feedback oscillator. Nano Lett. 11, 5054–5059 (2011).Gomis-Bresco, J. et al. A one-dimensional optomechanical crystal with a complete phononic band gap. Nat. Commun. 5, 4452 (2014).Barclay, P. E., Srinivasan, K. & Painter, O. Nonlinear response of silicon photonic crystal microresonators excited via an integrated waveguide and fiber taper. Opt. Express 13, 801 (2005).Johnson, S. G. et al. Perturbation theory for Maxwell’s equations with shifting material boundaries. Phys. Rev. E 65, 066611 (2003).Chen, S., Zhang, L., Fei, Y. & Cao, T. Bistability and self-pulsation phenomena in silicon microring resonators based on nonlinear optical effects. Opt. Express 20, 7454 (2012).Armaroli, A. et al. Oscillatory dynamics in nanocavities with noninstantaneous Kerr response. Phys. Rev. A 84, 053816 (2011).Mancinelli, M., Borghi, M., Ramiro-Manzano, F., Fedeli, J. M. & Pavesi, L. Chaotic dynamics in coupled resonator sequences. Opt. Express 22, 14505 (2014).Xu, Q. & Lipson, M. Carrier-induced optical bistability in silicon ring resonators. Opt. Lett. 31, 341 (2006).Johnson, T. J., Borselli, M. & Painter, O. Self-induced optical modulation of the transmission through a high-Q silicon microdisk resonator. Opt. Express, 14, 817–831 (2006).Pernice, W. H., Li, M. & Tang, H. X. Time-domain measurement of optical transport in silicon micro-ring resonators. Opt. Express, 18, 18438–18452 (2010).Yang, J. et al. Radio frequency regenerative oscillations in monolithic high-Q/V heterostructured photonic crystal cavities. Appl. Phys. Lett. 104, 061104 (2014).Zhang, L., Fei, Y., Cao, Y., Lei, X. & Chen, S. Experimental observations of thermo-optical bistability and self-pulsation in silicon microring resonators. JOSA B 31, 201–206 (2014).Deng, Y., Liu, F., Leseman, Z. & Hossein-Zadeh, M. Thermo-optomechanical oscillator for sensing applications. Opt. Express 21, 4653–4664 (2013).Lifshitz, R. & Cross, M. C. Response of parametrically driven nonlinear coupled oscillators with application to micromechanical and nanomechanical resonator arrays. Phys. Rev. B 67, 134302 (2003)
Dynamics of a vertical cavity quantum cascade phonon laser structure
Driven primarily by scientific curiosity, but also by the potential applications of intense sources of coherent sound, researchers have targeted the phonon laser (saser) since the invention of the optical laser over 50 years ago. Here we fabricate a vertical cavity structure designed to operate as a saser oscillator device at a frequency of 325 GHz. It is based on a semiconductor superlattice gain medium, inside a multimode cavity between two acoustic Bragg reflectors. We measure the acoustic output of the device as a function of time after applying electrical pumping. The emission builds in intensity reaching a steady state on a timescale of order 0.1 μs. We show that the results are consistent with a model of the dynamics of a saser cavity exactly analogous to the models used for describing laser dynamics. We also obtain estimates for the gain coefficient, steady-state acoustic power output and efficiency of the device
- …